Page 2 of 3
3940 Dr. Martin Luther King Drive
St. Louis, MO 63113
P/N 00911624 FORM NO. K1061 R12/15 ECO 4-004-15
* Larger Transformers (250VA Max.) may be installed;
Additional mounting holes (11/64” Dia.) may be
required.
NOTES:
1. Mount Starters, using 1/4-20 thread-forming
screws, as indicated in above chart and as
follows:
TELEMECANIQUE (Qty. 4)
ALL OTHERS (Qty. 3)
2. Mount Circuit Breakers, using 8-32 screws, to
1-3/4” standoffs, in indicated holes.
3. Mount Transformers, using 10-24 x 3/8” thread-
forming screws.
4. Mount Optional Ground Lug in Hole No. 1, using
a 1/4-20 screw. (Order Killark Cat. No. KIT-345.)
5. Optional Control Circuit Fuse Block (Buss
No. 3792) and Terminal Block (Westinghouse
TBABT3) may be installed on pan as space
permits.
CAUTION:
Maintain 1/2” (12.7mm) minimum
electrical clearance to all live points.
NOTE
: Westinghouse (Cutler-Hammer) W200 Series
Starters are electrically reset and do not use this
manual reset.
