10
Getting Started
2. Getting Started
2.1 Connecting the Power Supply of the Baby Unit
• Insert the DC plug of the power
adaptor into the DC socket on the
back of the Baby Unit.
• Connect the other end of the power
adaptor to mains power.
• The baby unit turns on and the power
indicator lights in Green colour.
Note
Only use the supplied power adaptor
(DC5V/1000mA).
2.2 Fixing magnetic mount on the wall
Pair button
• Mark the position of the screw holes on the wall.
• Install wall anchors (Not provided) suitable for the wall type and
mounting screws if needed.
• Fasten the mounting screws (Not provided) on the wall.
• Position the cable behind the base as per image before hooking the
base on the wall.