21
Wi-Fi® Internet Viewing
English
5.3 Setup
Connect the Wi-Fi® Camera to the Power Adaptor, then plug into mains power.
The Camera must be within range of the Wi-Fi® router with which you want to
connect. Make sure the password of the router is available for entering during
the in-app setup process.
Status of LED Indication:
-
Pair / Setup state:
LED is Flashing Green.
-
Unconnected state:
LED is Flashing Red.
-
Connected state:
LED is Solid Green.
Note:
You can only setup via a compatible smartphone or tablet only.
5.4 User Account and Camera Setup on Android™ Devices or
iPhone®/iPad®
What you need
• Wi-Fi® Camera Unit
• Power adaptor for the Camera
• Device with Android™ system version 8.0 and above
• Or iPhone®/iPad® with iOS version 12.0 and above
5.4.1 Power ON and Connect the Camera
• Switch the parent unit off before connect the camera to Wi-Fi®.
• Connect the power adaptor to mains power and insert the plug into the
power socket on the back of the Camera Unit, the unit turns on.
5.4.2 Download HubbleClub by Hubble Connected App
• Scan the QR code with your smart device
and download
HubbleClub by Hubble
Connected
App from the App Store for iOS
devices or from the Google Play™ Store for
Android™ devices.
• Install
HubbleClub by Hubble Connected
App
on your device.