17
Parent Unit Menu Options
English
4.5.3 Delete a camera
1. Press the button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until is highlighted, and
the - (delete) / + (add) / (view) / (scan) menu will pop up.
3. Press the
+
UP button or
-
DOWN button to select - (delete), and
press the
button to confirm.
4. Camera
1
/
2
/
3
/
4
will pop up, press the
+
UP button or
-
DOWN
button to select the desired Camera, and press the
button.
5. Press the
+
UP button or
-
DOWN button to select , then press the
button to delete that camera.
Note:
You are not allowed to delete the camera if there is only one registered
camera in the system.
4.5.4 Scan camera
This function is only available when you have more than 1 Baby Unit
(Camera).
1. Press the button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until is highlighted, and
the - (delete) / + (add) / (view) / (scan) menu will pop up.
3. Press the
+
UP button or
-
DOWN button to select (scan), and
press the
button to confirm.
4. The screen will then display images from the different cameras in a loop
of Camera
1
/
2
/
3
/
4
, changing about every 12 seconds.
TIP
You can also press the button repeatedly to select the available camera
options from
1
/
2
/
3
/
4
,
(scan)
.
4.6 Temperature
1. Press the button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until is highlighted.
3. Press
+
UP /
-
DOWN to select
°C
or
°F
.
