INSTALLATION MANUAL
MASTERLINE Ultimate Micro
Page 2 of 4
HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of tools and
accessories other than the ones recommended herein. Any installation performed by unqualified personnel voids the product warranty provided by
HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these products. For advice concerning the gen-
eral handling of these products please contact HUBER+SUHNER.
INSTALLATION
Step 1:
Hoisting points:
The Masterline Ultimate Micro (MLUM) may
only be lifted up as marked in red. Make sure
that the pull rope does not slip out of the
bracket during pulling and that the pull rope
has enough pulling force to safely lift the
MLUM system.
Avoid buckling the cable or bending it at less
than the minimum radius while the device is
being raised.
All plug-type cables must be unplugged prior
to raising.
Step 2:
Fixing:
Mast and wall mounting:
The MLUM system can be mounted either on
the mounting holes marked with a red circle or
over the bracket using hose clamps. Please
heed the instructions given by the manufac-
turer of the fixing materials.
Mast mounting:
Always use hose clamps to fix the MLUM sys-
tem to a mast. Guide the hose clamps at the
bottom into the lug provided and then secure
them to the mast.
71
– 81 mm
6.5 mm
13.5 mm
9
mm
11
mm
