INSTALLATION MANUAL
MASTERLINE Ultimate Micro
Page 3 of 4
HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of tools and
accessories other than the ones recommended herein. Any installation performed by unqualified personnel voids the product warranty provided by
HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these products. For advice concerning the gen-
eral handling of these products please contact HUBER+SUHNER.
Step 3:
The fiber optic cable must be secured accord-
ing to national and local regulations. The
weight of the cable must be supported by the
cable fasteners.
Step 4:
In the case of a daisy chain installation, all the
MLUM systems must be fastened in accord-
ance with steps 1 and 2.
Step 5:
Once all the MLUM systems have been fas-
tened in accordance with the national and re-
gional regulations, they can be connected to-
gether with jumper cables.
Remove the protective cap before plugging in
and turn the connector to the correct position
without applying pressure. Then engage the
connector by pressing. Turn it gently in the op-
posite direction to check that the connector is
properly engaged.
