Betriebsanleitung ACS-1000
Rev. 1.0 - 08/12
Hubitron Steuerungstechnik
Hubitron Steuerungstechnik, Hauptstr. 4/1, D-89611 Obermarchtal, Tel. +49(0)7375/922066, FAX +49(0)7375/922077
Seite 4 von 14
7.2.4 Compensation menu
start compensation of height
start compensation of length
back to the main menu
Menu height compensation
is displayed when the instruction
is carried out. After confirmation
the next instruction will follow.
back to the compensation menu
Menu length compensation
delete saved compensation data
is displayed when the instruction
is carried out. After confirmation
the next instruction will follow.
back to the compensation menu
7.2.5 Starting menu
Graphic display
set display data to 0
set display data to absolut
switch to text display
back to the compensation menu
wire
vibrates,
measurement
inaccurate
Text display
set display data to 0
set display data to absolut
switch to graphic display
back to the compensation menu
wire
vibrates,
measurement
inaccurate
8. Measuring procedure
To receive an exact measurement, the following
steps need to be followed:
•
mount the ACS-1000 and arrange
•
span the wire and arrange
•
compensate the height
•
compensate the length
8.1 Installation and arrangement
8.1.1 Installation
For installation we recommend the clamping set for
uneven surfaces or the magnet set for even,
magnetic surfaces.
