After installing the display, check if the face panel is loose. If yes,
please readjust accordingly.
When using the horizontal calibration, please ensure that the aircraft is
on a completely flat surface. Aircraft motors should be completely
disarmed. Do not move the aircraft during calibration or calibrate on an
uneven/tilted surface, or there will be errors.
Installing the HS001 display
Option 1: Secure the HS001
display to the HT015’s mobile
device bracket.
Option 2 (with the HV002 video
goggles): Press the release key on
the HV002 goggles to release its
face panel. Install the HS001 into
the exposed compartment and
shut the panel. After the
installation, one may put the
goggles on and adjust to fit with the
adjustable head strap.
Step 3
