●
The aircraft is programmed to only allow a Method 2
disarm in the case of a serious aircraft failure. Disarming the
motors in mid-flight will most likely cause the aircraft to
crash.
After the motors are armed and spinning, there are two ways of
stopping/disarming them.
Method 1:
When the aircraft has made a full landing, turn the Height Adjustment
Dial to its most downward position and hold it there. The motors will
stop after 5 seconds.
Method 2:
Turn both the Height Adjustment Dial and the Heading Adjustment
Dial completely downwards (at the same time). Release both dials
when the motors stop.
Method 1
Method 2
