14
©
2015 Hubsan
哈博森科技 版权所有
● Do not mix old and new batteries ● Do not mix different types of batteries
● Do not charge non-rechargeable battery.
7.2 INSTALL THE TX BATTERY
Close the cover
Remove the cover
Install 4 x AA batteries
according to the correct polarities
PUSH
PUSH
7.3 REVERSING CHANNEL SETUP
If you would like to reverse any of the stick functions due to personal preference then follow
the instructions below. Be aware that it will change the controls back to front.
Pull the throttle stick to the lowest position and long press the Pitch stick simultaneously to
enter into MAIN MENU interface. Push the Elevator stick up/down to select “Set Reverse”.
Select the “Exit” to exit.
7.4 SENSITIVITY SETUP
If you would like to change the sensitivity of any of the stick functions then follow the
instructions below.
Pull the throttle stick to the lowest position and long press the Elevator stick to enter into the
MAIN MENU interface. Push the Elevator stick up/down to select “Set Sensitive”, push the
stick right to enter into the “ set sensitive” interface, select “Expert mode” or “ Normal mode”.
Select” Exit” to exit.
0:08:49
SET REVERSE
Normal
Rudder
Aileron
Normal
Normal
M2
Exit
Elevator
0:08:49
MAIN MENU
Set Reverse
Set Sensitivity
5.8G Frequency
Set Manual
Exit
M2
Summary of Contents for X4 DESIRE H502S
Page 18: ...18 2015 Hubsan EXPLODED VIEW...
