Hubsan X4 DESIRE H502S, Instruction Manual

08

©

2015  Hubsan

哈博森科技　版权所有

Press the Photo/Video button for 0.5 second to take photos.

Press the Photo/Video button for 1.5 second to take videos and press again to save the videos.

5.4 PHOTO/VIDEO

Please stop recording before the SD card removed.                                                                

PHOTO

VIDEO

1. The video will stop when the transmitter battery runs low. 
2. When the memory of SD card is full, he screen will display “SD Full”. 
3. It is best to use a class 4+ SD card, and the capacity should no less than 4GB. 
4. Format the SD card in the transmitter before use.

position 1 (upward

)

position 2 (downward

)

GPS Switch

Photo Button

Video Button

RTH Switch

Important Note:  The GPS and RTH functions are only available 

outdoor.Please make sure the two switches keep downward when 

indoor.

The GPS Switch controls the  position-hold 
function.

In position 1 (up), the GPS function works. 

In position 2 (down), the GPS function is 
inactive.

For the Photo/Video function, please 
always power off the quadcopter and 
the transmitter when inserting or 
removing the SD card 

The RTH Switch controls the automatic return 
home function.

In position 1 (up), the RTH function works. 

In position 2 (down), the RTH function is 
inactive.