Hubsan X4 DESIRE H502S, Instruction Manual

09

©

2015  Hubsan

哈博森科技　版权所有

00:23:59

Altitute

GPS  6    N22.7914931    E:114.0479740

GPS  6    N:22.7914650   E:114.0479983

7.3V

7.3V

00:00:00
S: 0.1m/s

H: 0.0m

D: 0.0m

R   0
P   0
H 247

The Home Point is recorded when armed the motors with no less than 6 GPS satellites.

!

The RTH MODE only works when the GPS mode is activated with no less than 6 satellites.

6.2 RTH MODE (RETURN TO HOME)

ENTER INTO RTH MODE

Push the GPS Switch and the RTH Switch up, and the quad copter will enters into RTH mode. 
The flight control system will control the quad copter fly back to the home point and landing 
automatically.          

6.1 GPS POSITIONING/ HOME POINT SETTING

1.) GPS Positioning works ONLY when the GPS signal has no less than 6 satellites.

2.) Home Point is recorded when armed the motors with no less than 6 GPS satellites.

3.) It should be in an open place to search for the GPS satellites, it’ll take 3 mins to finish the 

searching, and the GPS signal strength depends on the flying environment.

Pull up the GPS switch to activate the GPS positioning.

Pull down the GPS switch to exit the GPS positioning and only altitude hold works.

6. ADVANCED PERFORMANCE SETUP

GPS  6

GPS  6

00:23:59

Altitute

N22.7914931    E:114.0479740

N:22.7914650   E:114.0479983

7.3V

7.3V

00:00:00
S: 0.1m/s

H: 0.0m

D: 0.0m

R   0
P   0
H 247