7
THE HUBSAN X4
7
THE HUBSAN X4
18
Removing Props:
Hold the prop, insert the U wrench under the prop, press down and
the prop will easily come off the motor shaft.
The propellors are dangerous when the quadcopter is flying. To avoid injury or
damage, please consider installing the protection cover.
Instructions:
Remove the props. Position the cover’s four holes with the motors. Press each of them
on the motors, then re-install the props in their correct positions on the X4 .
When removing the protection cover, please remove the props first as in the above
steps, and pinch off the protection cover from each motor. After any crash landing,
please check to make sure the protection cover is still on tight, and make sure the
body, motors and props are not damaged.
4.5 Set Real Time
Your transmitter can set a real time clock. Once you set the time it can display the real time
in your time zone.
Press down the ELEVATOR
stick for 1 second to enter setting status, move the stick
up/down to choose
SET REAL TIME
, push the ELEVATOR stick to the right, move it
up/down to choose and push right/left to set the time. After finishing, exit by pushing the
ELEVATOR stick to the left. Hold down the ELEVATOR stick for 2 seconds to exit.
4.6 Format SD Card
Insert your SD card into the transmitter. The transmitter can format your SD card.
Press down the ELEVATOR
stick for 1 second to enter setting status, move the stick
up/down to choose
FORMAT SD CARD
, push the ELEVATOR stick to the right, move it
up/down to choose and push right to confirm or exit. Hold down the ELEVATOR stick for 2
seconds to exit.
WARNING! ALWAYS FORMAT AND ACTIVATE CAMERA RECORDING
BEFORE FLIGHT!
0:08:49
MAIN MENU
Play Record
Set Real Time
Format SD Card
Set Reverse
Set Sensitive
5.8G Frequence
Exit
0:08:49
Set Real Time
Exit not Save
Exit and save
Year
:
2000
Month
:
01
Date
:
01
Hour
:
00
Minute
:
02
0:08:49
MAIN MENU
Play Record
Set Real Time
Format SD Card
Set Reverse
Set Sensitive
5.8G Frequence
Exit
0:08:49
Format SD Card
Are you sure:
NO
YES
4.4 Play Record
Your transmitter can play the video recording that you saved.
Press down the ELEVATOR
stick for 1 second to enter setting status, move the stick
up/down to choose
PLAY RECORD
, push the ELEVATOR stick to the right, push right/left
to choose NEXT/STOP. Hold down the ELEVATOR stick for 2 seconds to exit.
0:08:49
MAIN MENU
PLAY RECORD
Play Record
Set Real Time
Format SD Card
Set Reverse
Set Sensitive
5.8G Frequence
Exit
0:08:49
PREV
NEXT
001.avi 00:01
Stop and Exit
002.avi 00:00
