10
4. Open the binding mode (this step is only needed when bind
-
ing for the first time or switching to a different transmitter. Must
be done manually).
1) Go to APP settings - transmitter, transmitter connection
method: Leas
2) Select "Set the Connection Between the Transmitter and the
Aircraft" to search for the aircraft.
3) Short press the power button of the aircraft 3 times to enter
binding mode.
4) Select the detected aircraft and establish a connection.
Tips：
① The binding process is completed in the factory. Generally, the
user only needs to perform the first 3 steps.
② After the aircraft entered binding mode, the 4 LED and the
video LED (by the TF card slot) will turn into flashing green
lights. After the binding is completed, the LED will turn into solid
green.
③ During binding, please keep the distance between the aircraft
and the transmitter less than 1 meter.
Connect the Aircraf t
HUBSAN_ZINO PRO_XXXXXX
Connect
Refresh
Tips:
1. Shor t press the power of the aircraf t 3
times to enter the aircraf t re-code mode;
2 . P l e a s e c o n f i r m m o b i l e d e v i c e a n d
r e m o t e c o n t r o l a r e c o n n e c t e d p r o p e r l y
b e f o r e c l i c k i n g t h e r e f r e s h b u t t o n t o
refresh the list of aircraf t;
3. Select the scanned drone and establish
a connection.
Control
Remote
Controller
Controls
Transmitter connection
Bluetooth
Leas
Transmitter firmware version
Transmitter hardware version
Set up transmitter connection to aircraft
Transmitter model
