EN - ENGLISH – 01/2020
Translation of original instructions
12
EN
Reproduction is prohibited
•
Get to know your winch before you actually need to use it. We recommend that you carry out
some trial runs to practice attaching the cable, familiarise yourself with the sounds your winch
makes under different loads, observe the way the cable is wound around the drum, etc.
•
Inspect the cable and equipment before each use. A frayed or damaged cable must be replaced
immediately. Only use a cable that meets the specifications recommended by the manufacturer.
•
Inspect the winch’s installation and bolts to ensure that all bolts are secure before each use.
•
Never attach the cable to itself or it may become damaged. Always use a pulley block, sling or
an appropriate-strength chain, as shown in the illustrations.
•
Store the remote control inside your vehicle in a place where it will not get damaged.
•
Any winch that looks to be damaged in any way, is found to be worn, or is not functioning
correctly should no longer be used.
•
When towing a vehicle, only pull on parts specified by the vehicle manufacturer.
•
Only accessories and/or adapters supplied by the manufacturer should be used.
•
Before using your winch, briefly test it in both directions. Even if the drum is only at an angle of
a few degrees, ensure that the winch is well balanced, especially if you have used the clutch.
The test will engage the gearbox with the drum once again if necessary.
Summary of Contents for EB20000
Page 2: ...EN ENGLISH 01 2020 Translation of original instructions 1EN Reproduction is prohibited...
Page 22: ...EN ENGLISH 01 2020 Translation of original instructions 21EN Reproduction is prohibited...
Page 23: ...EN ENGLISH 01 2020 Translation of original instructions 22EN Reproduction is prohibited...
Page 24: ......
