EN - ENGLISH – 01/2020
Translation of original instructions
9
EN
Reproduction is prohibited
CAUTION
Batteries contain inflammable and explosive gases. Always wear protective goggles during
installation and remove all jewellery beforehand. Do not lean over the battery while making
the different connections.
5. Attach the clevis hook to the cable: remove the pin from the hook, connect the hook to the
cable and replace the pin.
6. Always use the safety strap when winding or unwinding the cable. Using the nylon strap will
help you to keep your hands and fingers away from the drum when it is rotating.
7. Check that the drum rotates correctly. Pull and turn the clutch switch to the "DISENGAGE"
position. Manually pull out some of the cable and then, turn the clutch switch to the "ENGAGE"
position to lock the gearbox to the drum. Press the "OUT" button on the remote control. If the
drum turns and unwinds the cable, your connections are correct. If the drum turns and winds
up the cable, swap the motor connections. Repeat and check the drum rotation.
