©
2011 by Huchez Treuils S.A.S.
Translation of the original instructions manual
4
UK
Reproduction prohibited
Place hands or clothes, etc. in contact with moving parts, in particular the areas where the rope
is wound in/out.
3 - Warranty
Our electric winches are guaranteed for 2 years from the date of shipment (ex-works).
The seller undertakes to repair any operating fault resulting from a fault in the design, execution,
components or materials themselves.
The warranty does not cover wear and tear or damage resulting from a lack of regular or periodic
maintenance. It does not cover damage resulting from a lack of supervision, incorrect handling or
an incorrect use of the machines, in particular overloading, pulling at an angle, under or
overvoltage or incorrect connection.
The warranty does not apply to any disassembly, modification or replacement of mechanical or
electrical parts undertaken without our agreement or by a non-approved operator. The warranty
only applies to the manufacturer's original spare parts. During the warranty period, the seller must
replace or repair any parts recognised as faulty after inspection by the qualified and approved
department, all free of charge.
The warranty excludes all other services or compensation.
Repairs undertaken within the framework of the warranty are, in principle, performed in the
seller's workshops or the workshop of a representative approved by the manufacturer. When work
is carried out on the equipment outside of their workshops, the seller must cover the labour costs
related to the disassembly or reassembly of these parts if these operations are performed
exclusively by their personnel or a representative approved by the manufacturer. The parts
replaced become the property of the seller and must be returned to them at their own expense.
In the case of components with a particular relative importance not manufactured by the seller
themselves and which bear the brand of a specialist manufacturer, the warranty, which may vary
according to the manufacturer, is the same as that agreed by this manufacturer.
4 – Acceptance of the equipment
Conduct a visual inspection of the packaging to ensure that it is in good condition.
In the event of an anomaly, issue the usual reserves.
Check that the winch corresponds to your order
5 –Obligatory regulatory checks by the user
This equipment has been designed to be tested:
In a dynamic situation, with coefficient 1.1
In a static situation, with coefficient 1.25
The users are required to comply with the standards in force in their country.
With regard to France:
Order of 1
st
March 2004 relating to the verification of lifting machines and accessories:
The modifications to the regulation relating to the use and verification of lifting machines and
accessories, which came into effect on 1st April 2005, impose new obligations on all users:
The suitability inspection that involves checking that the lifting machine is suitable for the work
that the user intends to carry out, as well as for the risks to which workers are exposed, and
that the intended operations are compatible with the conditions of use for the machine defined
by the manufacturer.
The assembly and installation inspection that involves ensuring that the lifting machine is
assembled and installed in a safe way in accordance with the manufacturer's instruction manual,
