background image

 

© 

2011 by Huchez Treuils S.A.S.

 

Translation of the original instructions

 

2

UK 

Reproduction prohibited

 

 

PRODUCT DEVELOPED AND MANUFACTURED ACCORDING TO EUROPEAN STANDARD EN 13157 - 

REGISTERED DESIGN

 

To ensure the constant improvement of its products, HUCHEZ reserves the right to change the equipment as described 

below and, in this case, to supply products which differ from the illustrations in this instruction manual. 

Reproduction prohibited 

 
 

Contents 

 

1 – General warning...............................................................................................................  

2 – Presentation of the machines .............................................................................................  

3 – Handling - Storage ...........................................................................................................  

4 – Use, assembly and set up..................................................................................................  

5 – Servicing and maintenance ................................................................................................  

6 – Contraindications for use ...................................................................................................  

7 – Precautions for use ...........................................................................................................  

10 

8 – Compulsory regulatory checks ...........................................................................................  

10 

9 – Taking out of use .............................................................................................................  

11 

10 - FAQs .............................................................................................................................  

11 

11 – Spare parts ...................................................................................................................  

12 

12 – Example of the Declaration of Conformity ..........................................................................  

14 

Summary of Contents for TIREX 150 Kg















Reviews: