Use and Application of the Pressure EEZ®
Posture Perfect™ Wheelchair Cushion
The Posture Perfect™ Cushion is uniquely
designed using a high resilient (HR), custom molded
foam core that positions the body in the correct
seating posture, provides a leg abduction post to
prevent hip rotation and abrasion. The Posture
Perfect™ Cushion is strategically contoured to
provide optimum seating posture. Posture Perfect™
Cushions remain cool when combined with the
breathable moisture proof cover.
Remember, no cushion can eliminate seating pressure or totally prevent
pressure sores, therefore, you should regularly check for skin redness as a
noted indicator of tissue breakdown. The Posture Perfect™ Cushion may be
used in a sling seat wheelchair or with a solid seat insert.
The Posture Perfect™ Cushion has a moisture resistant cover designed to
repel fluids but it is not intended as an incontinent cushion nor should it be
submerged in water or used as a bathtub seating product. Replacement
covers are available from your Hudson dealer.
Size Selection of the Pressure EEZ®
Posture Perfect™ Wheelchair Cushion
Simply select the cushion that would match the width of your hips when
seated. Cushion size should not be determined by the wheelchair seat
width. Improper cushion fit will affect the performance of pressure
distribution of the cushion and its proper positioning support of the body.
The length of the cushion should be determined by placing the cushion
at the back of the wheelchair while the length extends to the front within 1"
to 2" from the back of the knees. The ischial tuberosities (sitting bones)
should be centered in the seat in the center of the back seating area.
The footrest should be adjusted properly in order to enhance seating
comfort and help to lower peak seating pressures.
In order to prevent the Posture Perfect™ Cushion from sliding on the
wheelchair upholstery, especially during transfers, follow these instructions:
Molded Foam Core with Progressive
Support Technology (PST)
Designed to contain the thighs and pelvis
in the correct seating posture. PST produces
the right degree of cushion firmness. Smaller,
lightweight clients receive a softer more
compliant cushion, average weight clients a
medium firmness and larger heavier clients
receive a firmer more supportive cushion.
The unique construction of high resilient (HR)
molded foam provides maximum stabiliza
-
tion, positioning, pressure relief and correct
seating posture.
Protective Inner Liner
Inner liner is a durable, soft, sealed,
moisture proof membrane to provide protec
-
tion from incontinence and ease of cleaning.
Air vents permit evacuation of air when
seated to provide comfort.
The Posture Perfect™ Cushion Cover
Outer cover is a removable, washable,
flame retardant, stretch polyester knit to
reduce interface pressure and shearing. It is
constructed with a vapor permeable moisture
proof urethane backing and a non-slip
bottom for comfort and safety.
A Positioning Seat Cushion
Maximizes Comfort and Pressure Relief
Firmness Cushion Width
Soft
10" to 14"
Medium 16" to 18"
Firm
20" to 24"
PST SIZE RANGES
HUDSON
Step
1.
Thoroughly clean the surface of the
wheelchair seat.
Step 2.
Peel off the paper backing of the Velcro®
strip provided and place 2" from the front, in the
center of the wheelchair seat, as shown.
Step
3.
Place the cushion on the wheelchair.
The
Velcro® strip on the bottom of the upholstered
Posturel™ Cushion as well as the non-slip surface
and the Velcro® strip placed on the seat will
prevent sliding when changing body position
while seated.
™
POSTURE
PERFECT
POSTURE
PERFECT
Wheelchair Cushion
