6
Step 2. (Fig. 13 and 14) Motor to Receiver
Electrical Connections: Connect the black
wire from the fan to black wire marked "TO
MOTOR L"from the Receiver. Connect the
white wire from the fan to the white wire
marked "TO MOTOR N" from the Receiver.
Connect the blue wire from the fan to the
blue wire marked "For Light" from the
Receiver. Secure the wire connections with
the plastic wire nuts provided.
Step 3. (Fig. 13 and 14) Receiver to house
supply wires electrical connections: connect
the black (hot) wire from the ceiling to the
black wire marked "AC in L" from the
Receiver. Connect the white (neutral) wire
from the ceiling to the white wire marked
"AC in N" from the R eceiver. Secure the
wire connections with the plastic wire nuts
provided.
Step 4. (Fig. 13 and 14) If your outlet box
has a ground wire (green or bare copper)
connect it to the fan ground wires; otherwise
connect the hanging bracket ground wire to
the mounting bracket. Secure the wire
connection with a plastic nut provided. After
connecting the wires, spread them apart so
that the green and white wires are on one
side of the outlet box and black and blue
wires are on the other side. Carefully tuck
the wire connections up into the outlet box.
Note:
Fan must be installed no more than a
maximum distance of 30 feet from the
transmitting unit for proper signal
transmission between the transmitting unit
and the fan's receiving unit.
Figure 13
Figure 14
White (neutral)
White (neutral)
Green or bare
copper (ground)
White ("AC IN N")
White ("to motor N")
Ground
(green)
(Connect to
ground wire on
hanger bracket
if no house
ground wire
exists.)
Outlet box
Black (hot)
Black ("AC IN L")
Black ("to motor L")
Receiver
Blue (for light)
Blue (for light)
Black (motor)
INPUT
AC120V
AC SUPPLY
White
White
White
Blue
Black
Black
Black
Black
AC "L"
AC "N"
Black
Black
Black
Wall
transmitter
Ground
Ground
Green
Green
White
Blue
Black
Receiver
