User Guide, Maintenance and Care
• When not in use please power OFF the tool and place the pendulum lock in locked
position.
• The laser tool is sealed and calibrated at the plant to the accuracy specified.
• It’s recommended to carry out an accuracy check before its first use and periodic checks
during future use especially for precise layouts.
• Do not touch the glass window in case leaving any fingerprint on the window, which may
affect the working performance of the laser.
• Do not store the laser tool in direct sunlight or expose it to high temperatures. The
housing and some internal parts are made of plastics and may become deformed at high
temperatures.
• Exterior plastic parts may be cleaned with a damp cloth, NEVER use solvents. Use a soft,
dry cloth to remove moisture from the tool before storage.
• Store the tool in its case when not in use. If storing for extended time, remove batteries
before storage to prevent possible damage.
• Do not dispose of this product with household waste.
• Always dispose of batteries per local code.
• Please recycle in line with local provisions for the collection and disposal of electrical and
electronic waste under the WEEE Directive.
Charging and Battery Safety
This product can work with either AA batteries or lithium battery. It may be
equipped with AA batteries or lithium battery by different dealers. Please check the
contents of the package according to the dealer's description.
Please read thoroughly and comply with battery safety instructions and attention before
charging.
Fail to read and follow may result in personal injury, fire, and property damages if the
battery is charged and/or used improperly.
Lithium Battery Safety:
• A power adapter with 5V=1A or 5V=2A or 5V=3A can be used for charging.
• Please charge in 24 hours when the low battery or the laser tool turns off due to low
power.
• If the lithium battery is not used for extended time, please charge the lithium battery once
every 6 months, each charging time is not less than 6 hours.
• The best charging temperature: 0
℃
to 20
℃
(32
℉
to 68
℉
)
※
Note:
• The laser tool is able to work while being plugged in directly even if taking out the battery.
