A. Battery and Charging:
• After Power ON, the power indicator will light up in green.
• When Li-ion battery is low and needs to be charged, the power indicator will flash in red.
• During battery charging, the power indicator will flash in green.
• When charging is complete, the power indicator will light up in green continuously.
B. Function:
• When switch to Pulse Mode, the power indicator will light up in blue.
• When return back to Normal Mode, the power indicator will return to green.
Operation
Turn ON the laser tool:
A. Method 1: Turn ON the Self-leveling Mode:
• Slide the pendulum to the Unlocked Position to turn ON the laser tool, the self-leveling
mode is activated by default.
• The laser beam(s) blink fast and laser tool will beep as well when the tool is out of
self-leveling range (3.5° ± 1°).
B. Method 2: Turn ON the Manual / Tilt Mode:
• When the pendulum in Locked Position, press and hold
for ≥ 2 seconds
to turn ON
the laser tool, the manual mode is activated by default.
• The laser beam(s) will blink about every 3-5 seconds to notify the user it is not
self-leveling now.
• Under manual mode, users can position the laser tool at various angles.
※
Note:
• Please notice the laser beam(s) projected in manual mode cannot be used as a
horizontal or vertical reference in nature.
• The pendulum lock and unlock status icon (
or
) will be displayed on the LCD and
Huepar APP/APK software page to indicate that it is currently in self-leveling mode or
manual mode.
Turn OFF the laser tool:
A. If the laser tool is in Self-leveling Mode:
• Slide the pendulum to the Locked Position to turn OFF the laser tool.
B. If the laser tool is in Manual Mode:
• Method 1:
Slide the pendulum to the Unlocked Position, and then slide the pendulum
