background image

15

please recharge your Headset. 

2. If after recharging for 20 minutes, the Headset does not turn 

on: For initial use, the power will be on after charging the 

Headset at least for 40 minutes.  It is suggested to fully re-

charge the Headset if you use it for the first time.

3. Does not show the recharging sign: When the battery is com-

pletely exhausted or the Headset has not been used for a long 

time, when charging, the red indicator light will be lit after a 

few minutes. 

4. You hear no sound coming from the Headset: 

- Make sure the Headset has been paired with the other Blue-

tooth device. 

- Make sure the Headset is on. 

- Make sure the distance between the Headset and the paired 

Bluetooth device is within 10 meters. 

- Make sure your mobile phone has a good signal. 

- Some Bluetooth mobile phones support only one Headset, if 

you pair it with more than one Headset, it may cause the other 

Headsets being cut off.

    

22. Storage of the Headset 

- Using the non-original accessories, it may debase the product’s 

function, cause the product damage, electrical conflict and the 

termination of the warranty. 

- Do not disassemble the Headset, it may damage the Headset 

accidentally or cause the warranty invalidation. 

Summary of Contents for HCB10

























Reviews: