HUGH CRANE (Cleaning Equipment) Ltd –
COMMANDO
500
BARROW UNIT
ManC500.doc
- 5 -
OPERATION
PREPARING THE MACHINE FOR USE:
BEFORE STARTING WORK
a)
Check engine, gearbox and pump oil level and top up if required.
b)
Fill fuel tank with clean diesel fuel.
c)
Ensure unit is standing on level ground.
d)
Connect the mains supply hose to the water inlet coupling. Confirm that the water
supply has sufficient capacity to keep the COMMANDO 500 supplied continuously
with 20 litres/min at a positive pressure. Alternatively a suitable vessel may be used
with the suction hose and strainer provided.
e)
Connect the by-pass return hose to its connection point and place the end of it in a
suitable receiving vessel.
e)
Connect the high pressure hose to the outlet coupling and ensure that it is fitted with
a spray gun and lance before turning on the mains water and starting the machine.
WATER INLET
COUPLING
HIGH PRESSURE
OUTLET COUPLING
BY PASS HOSE
COUPLING
