Figure 15: System Status page
The operational parameters listed on the System Status page are shown in a tabular format. The first (left) column
identifies the parameter categories:
•
Satellite Interface – Contains information on the receive status and signal strength, as well as error messages related
to satellite modem receive information.
•
Administrative States – Contains information on software downloads to this satellite modem, security keys, and
other administrative functions.
Typical values for System Status parameters
The following table lists typical values and the range of values for parameters on the System Status page. This information
may help you understand the values displayed by your satellite modem.
To see the definition of any parameter, click the parameter name on the screen.
Table 5: System Status parameters – typical values and range
Range of values
Typical values
Parameter
Satellite Interface (parameter category)
0–255
160–220
Receive Signal Strength
20–65
29–45
Normalized Power Word
Up – The modem is receiving signals
from the satellite.
Up
Receive Status
Down – The modem is not receiving
signals from the satellite.
16
System Control Center
HN9000 Satellite Modem User Guide –
1037577-0001 Rev. B
Chapter 2
