Range of values
Typical values
Parameter
Any whole number.
≥ 0
Total Satellite Packets Transmitted
Any whole number.
≥ 0
Total Satellite Packets Dropped
Red flags on Transmission Information page
If you see a red flag next to Transmit Status on the Transmission Information page, see Transmit Status in
Table 6:
Explanation of red flags on System Status page
on page 18. The information for Transmit Status in that table also applies
to the Transmission Information page.
Terminal Status page
The Terminal Status page displays information about the operational state of the satellite modem and operational statistics
such as messages and packets sent, received, and dropped. It indicates whether acceleration is enabled and provides a
count of traffic that moves across the LAN to the satellite modem.
Figure 18: Terminal Status page (top part)
The operational parameters listed on the Terminal Status page are shown in a tabular format. The first (left) column
identifies the parameter categories:
•
Overall Status – Shows the major features such as dial backup or acceleration (not all features may be part of your
service plan.
•
Transport Interface Receive Statistics – Indicates messages received and decoded by the satellite modem from the
satellite.
23
Chapter 2
HN9000 Satellite Modem User Guide –
1037577-0001 Rev. B
System Control Center
