Figure 12: Format of status and information screens
Each status and information screen contains categories of parameters that relate to various aspects
of satellite modem operation, as explained in the sections that follow for each status and
information screen. To see a definition of any parameter, click the parameter name. The definition
appears in a pop-up window. For many parameters this window also includes additional
information. If you do not see the pop-up window, it may be hidden by other windows; in this
case, minimize other open windows.
Count values such a count of errors or packets received may start at or revert to zero when they
reach a maximum number or if the modem is restarted.
State codes on status and information screens
A state code is a number that indicates the operational state of the satellite modem. State codes
are displayed with an explanation in words, as shown in the following example. On the System
Control Center status and information screens, state codes are shown next to selected parameters,
as shown in
Figure 13: Example of a state code
on page 16, or next to a parameter that is related
to an error condition.
Figure 13: Example of a state code
For a list and explanation of all state codes, see
Table 12: State codes
on page 32.
Red flag indicator
On the status and information screens, a red flag next to a value indicates a problem related to
the parameter listed in the same row where the flagged value appears. The flagged value appears
HN9000 Satellite Modem User Guide
16
1037577-0001 Revision F
System Control Center
Chapter 2
