Hughes Network HN9000 User Manual Download

Page: 3 / 86

Contents

Understanding safety alert messages................................................................................vii

Messages concerning personal injury....................................................................................................vii

Messages concerning property damage.................................................................................................vii

Safety symbols.......................................................................................................................................vii

Contact information............................................................................................................ix

Chapter 1: Satellite modem overview...........................................................1

Scope of this user guide...........................................................................................................................2

Supported configurations.........................................................................................................................2

Satellite modem specifications.................................................................................................................4

Power supply information........................................................................................................................4

Operating environment.............................................................................................................................5

Ventilation and heat sources.........................................................................................................5

Modem operating position.......................................................................................................................6

Computer requirements............................................................................................................................6

Chapter 2: System Control Center.................................................................9

Accessing the System Control Center....................................................................................................10

Creating a shortcut to the System Control Center......................................................................10

System Control Center home page.........................................................................................................11

Text links....................................................................................................................................11

Common features on System Control Center screens............................................................................12

Button links................................................................................................................................13

System Status button......................................................................................................14

Links in the left panel.................................................................................................................15

Small icon on System Control Center screens...........................................................................15

Status and information screens...................................................................................................15

State codes on status and information screens...............................................................16

Red flag indicator...........................................................................................................16

System Status page.................................................................................................................................17

Typical values for System Status parameters.............................................................................18

Red flags on System Status page................................................................................................20

Reception Information page...................................................................................................................21

Typical values for Reception Information parameters...............................................................22

Red flags on Reception Information page..................................................................................23

Transmission Information page..............................................................................................................24

Typical values for Transmission Information parameters..........................................................25

Red flags on Transmission Information page.............................................................................26

Terminal Status page..............................................................................................................................26

Typical values for Terminal Status parameters..........................................................................27

iii

HN9000 Satellite Modem User Guide

1037577-0001 Revision F

Summary of Contents for HN9000























































































Search results

Summary of Contents for HN9000

Reviews:

Related manuals for HN9000

Brands by name

Popular brands

Hughes Network HN9000, User Manual

Search results

Summary of Contents for HN9000

Reviews:

Related manuals for HN9000

Brands by name

Popular brands