3500145-0001 Revision A
7
7. Insert the battery into its slot in the terminal and lock it in place. Close and
lock the battery door.
Step G: Mounting parts on the accessory mounting plate
Use the parts in the
vehicular install kit
(stand off, screws,
lock washers, and tie
wraps) to mount the
parts to the accessory
mounting plate.
Step H: Connecting power
Insert the power supply plug into the vehicle 12 Vdc accessory outlet. This can be done with or without
initial power to the 12 Vdc outlet supply
Note: You can operate the terminal without a battery, but Hughes recommends operation
with a battery installed for a graceful power down if power is disconnected.
The terminal cannot operate solely on battery power. The antenna requires power from the
vehicular power source.
The terminal can be operated while the battery is charging.
Your vehicle's battery may be drained if the terminal is used without running the engine.
Summary of Contents for 9250
Page 9: ...3500145 0001 Revision A 9 ...
