Radio assembly
The radio assembly shown in
Figure 6
consists of the radio transmitter/receiver,
polarizer waveguide, and feed horn. For information about radio polarization, see
Figure 15
on page 32.
Figure 6: Radio assembly
Small hardware parts list
Table 2
lists the small hardware parts included with the antenna kit and radio
assembly.
Table 2: Small hardware parts
Hardware parts
Quantity
Listed parts are used to
attach...
Illustration showing
where parts are used
5
/
16
inch ×
3
/
4
inch carriage bolts
5
Reflector bracket and tilt
plate to Az/El mount
assembly
Figure 8
on page 25
5
/
16
inch hex head serrated
flange nuts
5
5
/
16
inch ×
3
/
4
inch carriage bolts
4
Antenna reflector to
reflector bracket
Figure 10
on page 27
5
/
16
inch hex head serrated flange
nuts
4
1
/
4
inch ×
½
-inch Phillips head screw
1
Chapter 2 • Antenna parts and recommended tools
1039384-0001 Revision C
19
