If you do not see a Local Area Connection link or if a red X appears next to the link, the
network is not installed correctly. Check your network configuration and connections. You
cannot configure your system if the red X is present.
Figure 36: Network and Sharing Center – Windows 7
3.
Click the Local Area Connection icon, which represents the satellite modem network
connection.
The Local Area Connection Status window opens.
4.
Click
Properties.
The Local Area Connection Properties dialog appears, as shown in
Connection Properties – Windows 7
on page 55.
Note:
Depending on the computer’s security settings, a message may appear, requesting
that you confirm the action before proceeding. If you see this message, click
Continue
to proceed.
Figure 37: Local Area Connection Properties – Windows 7
5.
Ensure that both Client for Microsoft Networks and Internet Protocol (TCP/IP) are installed
and checked as shown.
6.
If NetBEUI is installed and checked, uncheck it or uninstall it.
7.
Highlight the appropriate TCP/IP connection (usually Internet Protocol Version 4). Be careful
not to uncheck the checkbox.
8.
Click
Properties
.
The Internet Protocol Properties dialog appears as shown in
on page 56.
55
HN9200 Satellite Modem User Guide
1038623-0001 Revision B
Appendix A
Computer settings
