background image

3/34     Getting Started with the HNS 9201 

  

 

 

1.0.

 

Introduction 

1.1.

 

About this guide 

This document introduces the HNS 9201 terminal, and explains how to set up the terminal for use 

on the BGAN network, register with the network, and set up data, voice and text connections. 

 
It is intended for first time end-users, Distribution Partners, Service Providers and anyone who 

wants to use a BGAN terminal to connect to the BGAN network and use network services. A 

previous knowledge of satellite communications is useful, but not essential. 
 

The sections include: 

 

 

Introducing the terminal – a brief overview of the physical features and interfaces of the 
terminal, and of the available services. 

 

 

Setting up the terminal – includes installing the battery and SIM card, connecting to a 
computer and registering with the network 

 

 

Making data, voice and text connections – an explanation of how to make a voice call, how 
to make IP data connections or an ISDN data connection, and how to send and receive a 
text message. 

 

1.2.

 

Other sources of information 

Refer to the following documentation for further details: 
 

 

This is one of a series of PDF documents in the BGAN Solutions Guide. The Solutions 

Guide is designed to help you make the most of your BGAN terminal. Other documents in 

the series are available for download from 

www.inmarsat.com/bgan

. Click on 

BGAN 

support

, then click on 

How to

 

guides

 

This Web site also gives further information on the BGAN service, including Industry 

solutions. 
 

 

For help in using BGAN LaunchPad, refer to “BGAN LaunchPad Help”, available from 
within BGAN LaunchPad by clicking 

Help > LaunchPad Help

 

 

For further information on the HNS 9201 terminal, refer to the “BGAN Satellite Terminal 
User Guide”, available for download from 

www.hns.com

 

1.3.

 

Upgrading software 

 

To download the latest USB drivers and BGAN LaunchPad software, go to 

www.inmarsat.com/bgan-updates. 

 

 

To download the latest terminal firmware, use BGAN LaunchPad.  

Summary of Contents for HNS 9201



































Reviews: