Do you have a valid configuration sheet?
Before continuing with the installation, do make sure to submit the Activation Form. Only after receiving
this can we send you the configuration details
Link to Activation Form –
Or email us the ESN on support@wafa.ae
Connecting Modem and PC for configuration of boot parameters
a) Attach the Ethernet cable between your PC and the MODEM.
Note
: The Modem auto detects the type of cables you have (crossover or Straight cable).
The modem’s IP address is preset to 192.168.0.1. If your PC’s network card to set for DHCP,
the modem will automatically allocate you the IP address of 192.168.0.2 (DHCP is also
enabled for normal operation on a commissioned system, you will see your own unique
IP’s after commissioning is complete).
After this ensure the Computer is set to “Obtain an IP address automatically”.
Changing LAN Settings/Assigning Static IP Addresses:
Windows Vista/7:
Firstly you will need to navigate to the Control Panel> Network & Internet Tab> View Network Status & Tasks>
Change Network Adapter Settings> Right Click on your LAN Connection> Properties.
Windows XP:
Navigate to Control Panel> Network Connections> Right Click on your LAN Connection> Properties.
You will always make use of IPv4.
Once IPv4 is selected, click ‘Properties’.
By default, your IP settings will be set to ‘Obtain an IP Address automatically’.
They should remain this way.
The same applies to obtaining a DNS Server.
