Depending on your location, you should have signal strength of 92 and above.
If no signal is displayed (29 or less) check cabling and the satellite parameters are entered correctly into the
MODEM (compare with your configuration sheet)
If your signal is a solid 30, it is possible that your polarisation is incorrect.
If your signal is 31 and above you are locked onto the correct satellite but you need to refine the polarisation
and/or pointing.
After confirming the settings inputted into the VSAT Manual Commissioning page you may notice that the
system status page reports the following:
SDL Initialization complete.
Awaiting first heartbeat msg.
Received first heartbeat message.
Received File/Group message.
Reconciling files... MM loading... Transferring MM to /cfg0/!
All files downloaded. Notifying CFM.
The modem will reboot at this stage – The status should revert to “All files downloaded, no pending changes”,
all lights should be on and the system status (
http://192.168.0.1
) should be green.