6
HugMy.pet ThePaw
Attaching ThePaw to your pet
The clip on the reverse of ThePaw is durable and
makes it easy to attach the tracker to your pet.
As described in Charge ThePaw (above), the pull
tab on the reverse bottom side of ThePaw can be
lifted to open the clasp. Releasing the clip takes a
little positive force which is to ensure that your pet
doesn’t inadvertently shake ThePaw loose.
Methods of attachment
Depending on the thickness of your pet’s collar, you may either attach ThePaw directly onto the collar or
simply use the clip to thread through any key ring tag – for example it can share the same ring as is used
for the pet’s identity tag.
If the clip ever becomes loose, then there are two small screws at the end of the clip which may be
tightened with a small screwdriver.
Turning ThePaw on and off
Charging ThePaw turns it on automatically. At other times you can turn ThePaw on and off as follows:
Switching on ThePaw
Hold the POWER key (located on the front centre in the middle of the large paw pad) for up to 7 seconds.
When you release the button four white (paw) lights on the front of ThePaw will shine brightly for a moment.
ThePaw is now switched on.
Switching off ThePaw
Whilst already powered-on, press the POWER button on the front of ThePaw 3 times in a row quickly, the
front (paw) blue and red lights flash fast 3 times and then the device shuts down.