page 22
© HUGO BIKE
Version of the manual 1.1
4.3.21. ASSIST – NUMBER OF PERFORMANCE MAPS FROM 3 - 5 - 9
It offers the option of choosing the number of power levels. You can select 3, 5 or 9 levels. The more stages, the finer the power
gradation. The default setting is 5 degrees.
4.4. ERROR CODE TABLE:
The accelerator does not return to the zero position
Abnormal accelerator function
Undervoltage protection
Surge protection
Abnormal function of hall probes
Abnormal phase conduction function
Control unit overheating
Engine overheating
Abnormal current sensor function
Battery temperature sensor abnormal
Motor temperature sensor error
Unit temperature sensor error
Abnormal speed sensor function
Abnormal BMS communication
Display communication error with the unit
4
5
6
7
8
9
10
11
12
13
14
15
21
22
30
Note: The individual functions may differ slightly depending on the version of the control unit and the display.
A warning triangle with an exclamation mark is displayed with the error number.
Company HUGO Bike s.r.o., Poříčská 282, 373 82, Boršov nad
Vltavou is an importer of this system and declares that the
equipment complies with the basic requirements of Government
Decree No. 616/2006 Coll. on technical requirements for
products with regard to their electromagnetic compatibility
(2004/108/EC) and Government Decree No. 481/2012 Coll., on
the restriction of the use of certain hazardous substances in
electrical and electronic equipment (2011/66/EC).
DISPLAY 500c