A
A
A
OK
B
A
screws.
screwdriver #9 and screws.
STEP 4:Place panel A and B on clean padded surface,
1.insrrt wooden dowel#7 into predrilled hole in panel A and B
by hand.
2.Use screwdriver #9 to fasten cam bolt #5 into holes on
panel A.
3. Slide the upper part of push catch to release the mending
plate.Use screwdriver #9 and screw #1 to attach the mending
plate of push catch #1 to panel A,make sure the screw heads
are flush.
STEP 5:Slide the upper part of push catch back to the
mending plate and secure according to sketch above.
