Hultafors H360G, Operating Instructions Manual

20

9. Maintenance, storage and transportation

9.1 Cleaning

•  Wipe off any dirt with a soft damp cloth.
•  Check the outlet openings of the laser 

regularly, and thoroughly clean them if 
necessary. Do not touch the glass with your 
fingers.

•  Do not use aggressive cleaning agents or 

solvents.

•  Do not immerse the device into water!
•  Clean and dry wet equipment, accessories 

and transport containers prior to packaging 
them. Only pack equipment again when it is 
completely dry.

•  Keep plug connections clean and protected 

from moisture.

9.2 Storage

9.2.1 GENERAL

•  The equipment may only be stored within the 

specified temperature limits  

(see Chapter 3 / Technical data).

•  After a prolonged storage, check the accuracy 

of the measuring device before using it.

9.2.2 BATTERIES 

•  For storage, remove the batteries from the 

device or from the charging station.

•  The storage should preferably be performed in 

a dry environment at room temperature 

(see Chapter 3 / Technical data).

•  Protect from moisture and humidity. Dry wet or 

damp batteries before storage or before use.

•  Prior to a prolonged storage, charge the 

battery to 80 % capacity 

(see Chapter 7 / 

operation).

 Repeat the procedure every 6 months.

•  After storage, fully charge the battery before 

use.

•  Check the battery for damage before use. Do 

not use damaged batteries!

9.3 Transport

9.3.1 GENERAL

The device may be damaged by strong vibrations 
or by dropping.
Never transport the product loose. Always use 
the original packaging or an equivalent transport 
container.
•  Switch off the measuring device before 

transporting it. During the shutdown the 
pendulum unit is locked in position and 
protected against damage.

•  Check the unit for damage before use.
•  Regularly check the accuracy of the device  

(see Chapter 8 / Checking the accuracy).