background image

7

4. Safety instructions 

4.1 Area of responsibility

4.1.1 MANUFACTURER

Hultafors is responsible for the safe delivery 
condition of the product, including the operating 
manual and the original accessories.

Hultafors Group AB

Hultaforsvägen 21

517 21 Bollebygd, Sweden

4.1.2 OPERATOR

The operator is responsible for using the product 
as intended, the deployment of personnel,  
their training and the operational safety of the 
product.
•  The operator understands the safety 

information which is stated on the product  
and the instructions which are contained in 
the operating manual.

•  The operator shall comply with local 

regulations relating to safety and accident 
prevention regulations as well as worker 
protection laws and regulations.

•  The operator shall immediately notify Hultafors 

if safety-related issues should develop on the 
product or during its utilization.

•  The operator shall ensure that the product 

is not utilized any further if defects become 
evident, and he will have the product repaired 
professionally.

4.2 Improper Use

•  Use of the device and the accessories without 

instruction.

•  Use of third-party accessories or additional 

equipment.

•  Use outside of the intended limits  

(see Chapter 3 / Technical data).

•  Use under extreme temperature fluctuations 

without an adequate acclimatization.

•  Disabling of safety devices and removal of 

hazard notices and labels.

•  Unauthorized opening of the device.
•  Performance of modifications or alterations 

the device or the accessories.

•  Deliberate blinding of third parties.
•  Inadequate safeguarding at the installation site.

4.3 Utilization limitations

The H3x360G is suitable for a continuous use in an 
atmosphere which can be inhabited by humans.
•  Do not operate the product in explosion-prone 

or corrosive environments.

•  Inform the local safety authorities and 

safety experts before working in hazardous 
environments, in close proximity to electrical 
installations or similar surroundings.

Summary of Contents for H3x360G






















Reviews: