Hultafors RECG, Operating Instructions Manual

11

WARNING

If disposed of improperly third parties 
can possibly be seriously injured and 
the environment polluted. The burning 
of plastic components generates toxic 
fumes which may impair health of
people. Batteries / rechargeable 
batteries may explode if they are 
damaged or heated excessively,
and thereby cause poisoning, 
burning, corrosion or environmental 
contamination.
If disposed of negligently unauthorized 
persons are able to use the product 
improperly.

•  The product may not be disposed of together 

with household waste. Perform a proper 
disposal of the device and the accessories  

(see Chapter 9/ Disposal).

•  Protect the product at all times from access 

through unauthorized persons, and especially 
children.

4.5 Electromagnetic compatibility (EMC)

The electromagnetic compatibility is the ability 
of the product to function in an environment 
with electromagnetic radiation and electrostatic 
discharges were are present, without causing an 
electromagnetic interference for other devices.

4.5.1 MALFUNCTION OF OTHER DEVICES AS A 
RESULT OF THE RECG HAND-HELD RECEIVER

Although the product meets the strict 
requirements of the relevant directives and 
standards, Hultafors can not completely 
exclude the possibility of interference with other 
devices (for example, when using the product in 
combination with third-party devices, such as 
field computers, personal computers, wireless 
devices, mobile phones, certain cables or 
external batteries).
•  When using computers and radio equipment 

make sure to observe to the vendor-
specific information about electromagnetic 
compatibility.

•  Only use original Hultafors equipment and 

accessories.

4.5.2 MALFUNCTION OF THE RECG HAND-HELD 
RECEIVER AS A RESULT OF OTHER DEVICES

Although the product meets the strict 
requirements of the relevant directives and 
standards, Hultafors can not entirely exclude 
the possibility that an intense electromagnetic 
radiation in the immediate vicinity of radio 
transmitters, two-way radios, diesel generators, 
etc. can distort the measurement results.
•  When performing measurements under these 

conditions check the plausibility of the results.