www.humancaregroup.com
9
ENGLISH
Assembly:
1. Put the mounting plate (4) inside the pre made
sliding track of the bed head pillar (seen above)
2. Place the Support Bracket Top (3) paralell to the
Mounting Plate, and align the holes.
3. Push in the pre‐made steering guides, of the
Support Bracket Top, into the sliding track.
4. Take one of the Screws M10 (8) and add the
Washer (7).
5. Assemble the Support Bracket Top and the
Mounting Plate with an Allen Key 6 mm. Do not
tighten the screw fully.
INFO:
The Self Help Pole should be assembled
on the same side as the directional lock
castor, the lock pedal is dark grey and on
the right hand side of the patient’s head
in the bed.
