6
www.humancaregroup.com
Wall bumber, LTC
Safety Advice
Safety Symbol
In this manual the adjacent safety warning
symbol is shown as:
This safety symbol does not
replace all the written safety
advice. You are instructed to read the
safety advice and follow it precisely.
Safety for the operator
With the aid of this manual, which must be
handed over together with the product, you
must ensure that every user is instructed in the
safe operation of the product before it is put
into service for the first time.
Draw every user’s attention to the possible
hazards that can arise if the product is not used
properly.
Pay attention to your obligations in order to
ensure the permanently safe operation of this
product to minimise all risks to the patient, user
and/or third parties.
Regular preventative maintenance is the
Operator’s responsibility.
Only allow this product to be used by persons
who have been instructed in its safe operation.
Make sure that stand‐in or temporary staff are
sufficiently well instructed in the safe operation
of the product.
Safety advice for the user
Make sure that the operator instructs you in the
safe operation of this product.
Each time, before using the product, check that
it is in perfect working order.
Make sure that there are no obstacles (eg:
bedside lockers, chairs, hoists, wall mounted
fixtures, or equipment etc.) which could impede
any adjusting or movement of the bed.
