www.humancaregroup.com
9
ENGLISH
Assembly:
The Wall bumper shall be mounted to the lower
cross beam between the castors on the head end
of the bed. The Wall bumper shall be mounted so
that the bent‐up part of the bumper is pointing
upwards.
1. Hold the wall bumper to the center of the cross
beam between the castors and mark the holes
position with a marker pen. The Wall bumper shall
be mounted with the slightly
2. Drill the four holes in the cross beam with a 3,5
mm metal drill.
3. Screw the Wall bumper to the cross beam with
the self‐drilling screws 4 mm
