14
1
2
3
2
1
4
5
This page can be copied out for the user
1. Adjust the height of the support table
as required by loosening the wing nuts.
2. Adjust the handles to the required
positions by loosening the wing nuts
under the arm supports.
Important! Do not raise the support table
above the “MAX” marking on the sides of
the handle tubes.
User information trolley walker
Height adjustment
1. Move the table aside and unfold the
frame.
2. Push the side tubes out sideways a
little and then unfold them.
3. Important! Make sure the latches
properly attach the side tubes to the
frame.
4. Ensure that the handles are in
minimum position; then fit the table
and draw out the wing nuts.
5. Adjust the handles to suitable
positions.
Before folding up the trolley, place the
handles in minimum position. This is to
reduce wear to the brake cables.
The trolley walker is folded up in exactly
the opposite way to which it is unfolded.
Place the table on top when the trolley
has been folded up as shown in the
picture.
Warning! Risk for pinching in
connection with folding up
Unfolding
Folding up
ENGLISH
