15
3
1
2
1
2
This page can be copied out for the user
User information RA-rollator
Make sure the handles are in minimum
position before unfolding.
1. Push the side tubes out sideways a
little and then unfold them.
2. Important! Make sure the latches
properly attach the side tubes to the
frame.
3. Adjust the handles to suitable
positions.
Height adjustment
Unfolding
Folding up
Before folding up the trolley, place
the handles in minimum position.
This is to reduce wear to the brake
cables.
The RA-rollator is folded up in exactly
the opposite way to which it is unfolded.
Warning! When folding up, beware
of the risk of pinching
1. Set the RA supports at the required
height by loosening the wing nuts.
2. Adjust the handles to suitable
positions by loosening the wing nuts
under the arm supports.
Important! Do not raise the RA supports
above the “MAX” marking on the sides of
the handle tubes.
ENGLISH
