ENGLISH
humantouch.com
6
7
Fig.7
Fig.6
1. Gently turn the chair onto its left-hand side (Fig.6).
2. Locate the four screw holes on the bottom of the front cross bar (Fig.7).
3. Using a Phillips-head screwdriver, secure the power hub to the chair with the cord facing upward,
using the four provided screws (Fig.8).
4. Leaving approximately two feet of the chair power cord, coil the excess cord neatly (Fig.9).
5. Open the pocket on the bottom of the chair canvas, then tuck the coiled cord into the lower pocket (Fig.9).
INSTALL THE POWER HUB
Front cross bar
Front cross bar
Fig.8
Power hub
Coiled
power cord
6. Plug the chair power cord into the power hub (Fig.10).
7. Plug the transformer into the power hub outlet (Fig.10).
8. Feed the transformer plug up through the hole in the chair canvas (Fig.11).
9. Gently return the chair to the upright position.
Fig.10
Fig.11
Transformer plug
Chair power cord
Transformer
Transformer plug
Fig.9
