English 13
Assembly and installation instructions
The cvibrating contraption kann be fixed to the bed in several ways. The vast
amount of different bed constructions makes it necessary to distinguish the best
applicable method of fixation.
Fixation to a slatted frame:
Note: A 10 mm size wrench is needed for the assembly.
Remove the mattress from the bed and prop up the slatted frame, so that you are
able to comfortably work on the underside of the frame.
Image 1):
Take one of the carriage bolts and put it through the end of one of the struts (1),
followed by a plastic sleeve (2).
Stick the bolt, together with the strut and sleeve, from the underneath into one of
the fixation holes of the contraption housing.
Put a plastic washer (3) over the end of the bolt, add a second strut (4), followed
by a washer (5) and a self-locking nut (6). Do not tighten the the nut yet.
Repeat until all four corners of the contraption are equipped with such fixation
arms.
