24 English
The CM-light communication system in everyday use
At a presentation
1. Set your hearing aid to "T" or "MT" in order to transmit sound information directly to
the T-coil in your hearing aid via the teleloop, or connect a headset to a CM-light.
2. Slide the mode selector switch to the Omni position.
3. Position your CM-light as centrally as possible, e.g. on the conference table.
4. Use the fold-out stand to raise the microphone unit somewhat and to mechanically
dampen jolting noises from the surface of the table.
5. Switch the CM-light on at the on/off switch.
6. Adjust the transmission volume to a comfortable level by setting the volume controller
on your CM-light to an appropriate level.
You are seated in groups around a number of
tables in a presentation room, for example.
Sound is distributed evenly throughout the
room via a loudspeaker system.
Occasional questions are put to the speaker
from people seated at the groups of tables.
Use
"Omni"
transmision mode.
