Page 43
CHAPTER 8: SOFTWARE UPDATE
Before initiating a software update, the WI-FI
network has to be configured with the help of
a sighted person.
Press and hold the Back button to access
the Settings, and select All Settings. Tap
to open. Select General and tap. Select
WI-FI Setup and tap.
Tap the OFF button on the top edge of
the screen to switch it to ON.
Tap on the network you wish to
configure.
To enter your password, tap on the
blinking cursor. A keyboard will appear
on the screen. Enter the password and
tap on Done. Then, tap on Connect.
Press Back twice to return to General in
Prodigi’s Settings.
To initiate a software update, select
Software Update and tap.
IMPORTANT: Make sure your system is
connected to power before updating the
software.
Once
the
WI-FI
connection
is
established, Prodigi will tell you whether