Tyres/wheels
151
Testing, care and maintenance
7
Check rims / attachment
Fig. 12
Check rims
Regularly carry out a visual inspection of the rims - see
maintenance intervals Table 3 on page 149.
Replace the wheels if:
- Cracks are visible
- Rim is deformed
- Bolt holes are deformed
- Significant mount of rust between rim and tyre
(contact surface)
- Deformed wheel bolts
Fig. 13
Check wheel attachment
1
Wheel bolts
2
Torque wrench
WARNING
Wheel bolts could come undone!
Wheels could come undone while driving - risk of accident!
Tighten the wheel bolts after the first 50 km and after a
wheel change - diagonally.
Regularly test that the wheels are fitted tightly using a
torque wrench - see maintenance table.
Tab. 4
Tightening torques for wheel bolts
On newly painted or new rims, the wheel bolts need
to be tightened again after 20 operating hours!
W - 010
W - 011
1
2
Tightening torque
Rim material
Tightening torque Nm
(max.)
Steel
100-110 Nm
Aluminium
120 Nm
Summary of Contents for 1000 Series
